01

Products

Differential pressure gauge with diaphragm element_P660 series

High-quality products, preferential prices, perfect after-sales service

Category:

Differential Gauges

Keywords:

Valve|Fitting

Detailed Introduction

Service intended

P660 gauge series are differential pressure gauge is designed to measure differential pressure from 4 kPa to 2.5 MPa at static pressure of 10, 25 MPa. A set of two stainless steel diaphragm mounted on a force balance allows direct reading of the actual differential pressure.

Nominal diameter	100 and 160 mm
Accuracy	±1.0 % of full scale ±1.6 % of full scale
Scale range (MPa, kPa, bar, mbar)	0 ~ 4 kPa to 0 ~ 40 kPa Flange size / DN 140, Max. static / 10 and 25 MPa 0 ~ 60 kPa to 0 ~ 2.5 MPa Flange size / DN80, Max. static / 25 MPa
Working temperature	Ambient : -20 ~ 65 °C Fluid : Max. 100 °C
Degree of protection	EN60529/IEC529/IP65
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.5 % per 10 ℃ of full scale

Standard features

Pressure connection (Flange)	Stainless steel (316L SS)
Element	Diaphragm 316 Ti : Flange size / DN140 (Low side and high side) 316L SS : Flange size / DN80 (Low side ) / Duratherm 600 (High side)
Case and cover	Stainless steel (304SS)
Window	Safety glass
Dial	White aluminium with black graduations
Filling liquid for differential cell	Silicone oil
Pointer	Black painted aluminium alloy (Zero adjustable)
Process connection	¼" NPT(F) ½" NPT(F) at 3-way and 5-way manifold valve
Standard accessories	Mounting bracket for 2" pipe mounting with silver gray finished steel
Option	■ Remote seal - Not available with less than 40 kPa of differential pressure range ■ Mounting bracket with 316SS for 2" pipe ■ 3-way and 5-way manifold valve ■ 3-way and 5-way manifold valve (Monel)

Differential pressure gauge with bellows element_P670 series

Differential pressure gauge with electrical contact type_P650 series