01

Products

Head mounting type multi temperature transmitter_R911 (with T900)

High-quality products, preferential prices, perfect after-sales service

Category:

Resistance Temperature Detector

Keywords:

Valve|Fitting

Detailed Introduction

Service intended

T900 series temperature transmitters are designed to fit into a standard molded terminal heads used on RTD and thermocouple assemblies to provide a 4-20 mA transmission signals. It is a cost effective solution for all temperature measuring process. It is accurate, durable and reliable. Numerous configurations for measurement in many deferent mediums are offered. Generally the transmitter produces a linear 4-20 mA output carried on a two-wire system. The transmitter is supplied factory calibrated, but also has zero and span potentiometers for a field adjustment.

Advantages

■ Two wire 4-20 mA current output signals
■ Universal input signals
- RTD temperature sensor
- T/C elements
- mV, V, mA, DC signals
■Programmable function setting
- Input signal type
- Measuring range
- Burnout Low/High setting
- mA output offset
■ Excellent accuracy and a long term stability
■ Low cost effective

Standard features

Electrical specification	Excitation voltage : 18 ~ 30 V DC (Noise range:20 mVp-p) Load resistance max : 600 Ω with 24 V Influence of excitation : 0.01 % FSO/V Reverse polarity : Protected Shock resistance : No change in performance after 20Gs Vibration : 0.1 g max. Response time (10 ~ 90 %) : ±500 mSec. Adjustment range : Free
Performance specification	Accuracy : ±0.2 % FSO Non - linearity : Better than 0.10 % FSO Repeatability : Better than 0.05 % FSO Long term stability : Better than 0.05% FSO per month Cutoff frequency : ±1 kHz Ambient temperature limits : -10 ~ 70 ℃ Ambient humidity limits : 10 to 90 % R.H
Input	Temperature sensor type : See table "Sensor type, range and accuracy" Signal source : See table "Sensor type, range and accuracy"
Output	Current output : 4 ~ 20 mA loop powered Electrical connection type : 2-wire technique Full scale output signal : 20 mA ±0.2 % Zero measured output : 4 mA ±0.03 % Sensor burnout : High (20.5 mA DC) or Low (3.9 mA)
Certificates	KCS Ex d IIC T6

Head mounting type temperature transmitter (RTD only)

Coil End Temperature Detector and Bearing Temperature Sensor_R840 series