Sanitary pressure gauge (3-A marking)_P752S series

  • P752(1).jpg

Sanitary pressure gauge (3-A marking)_P752S series

High-quality products, preferential prices, perfect after-sales service




Detailed Introduction

Service intended

P752S series have diaphragm seal to be combined with a pressure gauge. These series are suitable to be used for the situation where corrosive, contaminated, hot, and viscous pressure mediums are present, and it could be used for a chemical, food, beverage, biochemical, and pharmaceutical industry.

Special features 3-A certificated
Suitable for SIP and CIP
All stainless steel and welded construction
Nominal diameter 50, 63, 80 and 100 mm
Accuracy P752 (50 mm) : ±3.0 % of full scale
P752 (63 mm) and P752 (80 mm) : ±1.6 % of full scale
P752 (100 mm): ±1.0 % of full scale
Scale range -0.1 ~ 7 MPa
Working pressure Steady pressure : 75 % of full scale value
Fluctuating pressure : 67 % of full scale value
Working temperature Ambient : -25 ~ 65 °C
Fluid : Max.121 °C
Temperature effect Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately
±0.5 % per 10 ℃ of full scale

Standard features

Process connection ¾", 1", 1½" and 2"
Low and back
Diaphragm and seal housing Diaphragm : Stainless steel (316L SS)
Ra 12 ~ 20 ㎛
Seal housing : Stainless steel (316SS)
Case Stainless steel (304SS)
Electropolished with pressure relief
Cover 50 mm : Twist-lock polycarbonate (Diameter 50 mm)
63, 80 and 100 mm : Stainless steel 304SS
Window Safety glass (63, 80 and 100 mm)
Polycarbonate (50 mm)
Movement Stainless steel
Dial White aluminium with black and red graduations, dual pressure scale
Pointer Black painted aluminium alloy
Helium leak rate Tested to confirm leakage rates of less than 10-8 mbar •ℓ/sec
System filling Food grade oil (FDA certified)
Option Material of wetted parts : electropolished 316L SS


Demand Message